Talaria Mx5/Mx4 Turn Signal and Brake Light Kit Wiring Diagram

INSTALLATION VIDEO*CLICK HERE*

1. Turn Signal Switch: 

Installs on to left side handle bar, slide off grip and install switch within thumbs reach(Horn button on switch is not functional) Route switch and front turn signal wires through bike to the ignition cover.

2. Tail Light Bracket:

Remove screws and nuts from stock tail light and install into the provided bracket

3.Brake Light/Rear Turn signals:

Be mindful of Left and Right arrows on the back of tail light, the two connectors from the tail light plug into the switch wiring harness

4. Front Turn Signals:

Mounts to the forks with provided screws, Right is labeled, left is unlabeled. Use zip ties to secure loose wire to forks, tuck flashing module and extra wire under ignition cover.

5. Tail Light Plug:

Plugs into tail light connector

6: 2xScrews:

Lock washer is placed on screw before regular washer