Talaria Tail Light Installation

Step 1:

Remove the three subframe bolts on each side of the bike. There are 6 total bolts

Step 2

Unplug tail light and remove subframe

Step 3

Remove the 4 screws at the bottom of the subframe plastic cover

Step 4

Take off plastic cover and remove stock tail light

Step 5 (CYBERLIGHT SKIP TO STEP 7)

Take the bolts off the stock tail light, we will be using these for mounting our tail light bracket. It slides out easily

Step 6

Insert square ended screws into the tail light bracket first then install tail light

Step 7

Install tail light into subframe and route wire to the front of the frame. Reinstall plastic cover.

Step 7 

Plug in tail light connector and reinstall subframe and Done!